SILICONE MOULD RELEASE COMPOUND (H.V.G. - 40) PRODUCTION INFORMATION: THIS GREASE CONTAINS SPECIAL TYPES OF FILLER AND THICKNER. THIS GREASE DOES NOT ATTACK ON METAL AND PLASTIC AND RUBBER. TEMPERATURE RANGE: (-100 0 C to 2500C) AS A MOULD RELEASE AGENT FOR ALL TYPE OF PLASTICS, RUBBERS METALS, CERAMICS, EPOXIES ETC. 1. APPEARANCE : TRANSLUSENT WHITE 2. TEMP. RANGE : -40 0 C to 250 0 C 3. PENETRATION : 200 – 260 4. BLEED (at 205OC) : LESS THAN 2% 5. EVAPORATION AT 205 0 C : MAX 2% (FOR 24 hrs) 6. SOFTENING POINT : NOT LESS THAN 205 0 C 7. SPECIFIC GRAVITY : 0.97 8. DIELECTRIC STRENGTH : 9.0 kv/mm (rs:7648/75) 9. ARC RESISTANCE : Min. 80 SECONDS (IS: 7648/75) PACKING: - 1 Kg. 5 Kg. & 30 Kg. Jars
This is your website preview.
Currently it only shows your basic business info. Start adding relevant business details such as description, images and products or services to gain your customers attention by using Boost 360 android app / iOS App / web portal.
SILICONE MOULD RELEASE COMPOUND (H.V.G. - 40) ...
2017-10-26T08:54:00
SILICONE MOULD RELEASE COMPOUND (H.V.G. - 40) PRODUCTION INFORMATION: THIS GREASE CONTAINS SPECIAL TYPES OF FILLER AND THICKNER. THIS GREASE DOES NOT ATTACK ON METAL AND PLASTIC AND RUBBER. TEMPERATURE RANGE: (-100 0 C to 2500C) AS A MOULD RELEASE AGENT FOR ALL TYPE OF PLASTICS, RUBBERS METALS, CERAMICS, EPOXIES ETC. 1. APPEARANCE : TRANSLUSENT WHITE 2. TEMP. RANGE : -40 0 C to 250 0 C 3. PENETRATION : 200 – 260 4. BLEED (at 205OC) : LESS THAN 2% 5. EVAPORATION AT 205 0 C : MAX 2% (FOR 24 hrs) 6. SOFTENING POINT : NOT LESS THAN 205 0 C 7. SPECIFIC GRAVITY : 0.97 8. DIELECTRIC STRENGTH : 9.0 kv/mm (rs:7648/75) 9. ARC RESISTANCE : Min. 80 SECONDS (IS: 7648/75) PACKING: - 1 Kg. 5 Kg. & 30 Kg. Jars
2017-10-26T08:54:00
Share it on
Submit Your Enquiry