SILICONE EMULSION 60% PRODUCTION INFORMATION DESCRIPTION: M.R Silicone Emulsion is a nonionic oil in-in-water-emulsion of medium Viscosity polydimethylsiloxane dispersed in water.Even in diluted form, The emulsion is well stable with regard to shear stress. APPLICATION: M.R Emulsion is primarily used as a lubricant and release agent for application involving plastic, rubber and printing industries. In rotary offset printing, M.R Silicone Emulsion improves the heat resistance of the paper and reduces its sensitivity to shear. TYPICAL PHYSICAL PROPERTIES CHEMICAL NATURE DIMETHYLPOLYSILOXANE Sp. Gr. 0.98 Emulsifier Non-Ionic PH 6.5 To 7 Diluents Water Solids 60% Color White Base Fluid viscosity 1000 cst METHOD OF APPLICATIONS: M.R EMULSION can be used either as supplied or diluted with water to desired concentration, depending on the characteristics of the release and lubricant. It is generally suggested to start with a dilution of 1 part of Emulsion M.R EMULSION to 20 parts cold water and then to adjust the amount upwards or downwards in order to determine the most cost effective. Concentration. In the graphic industry dilution required is usually 1:40 but this can vary depending on the kind of paper used. PACKING: 50 KG CARBOY. Non-Warranty: The information given in this bulletin is based on our experience that we believe to be Reliable but we cannot accept any responsibility for operations not under Our direct control, it is offered solely for your consideration, innovation and verification. ------------------------------------------------------------------------------------------------------------ D.R.P SILICONE ADDRESS: UNIT NO 204/222 NITIN INDUSTRIAL COMPLEX, SUHASINI PAWASKAR ROAD, W.E.HIGHWAY DAHISAR (E) MUMBAI- 400 068. TEL/FAX 2896 8673 * (O) 2897 6177 * MOBILE - 9920099761 Email: mrsilicones@gmail.com Visit us at : www.mrsilicone.co.in