SILICONE DEFOAMER PRODUCTION INFORMATION MRSI-SD is silicone base proprietary product used extensively in a wide variety of industrial batch processing applications. These include petroleum refining, textile processing leather finishing, fermentation processes, oil and antifreeze operation, etc. MRSI-SD is used where foaming creates intense problem especially where aqueous systems are followed. Addition of MRSI-SD prevents formation of foam and if foam formed then it eliminates within seconds. TECHNICAL TEST REPORT Appearance : Milky emulsions Chemical composition. : Dimethyl Poly siloxane % Solid. : 10% to 70%(as per requirement) pH. : 7 Specific Gravity. : 1.0 Suitable diluent. : Soft water Defoaming time : 5 second Nature : Non-Ionic APPLICATION In jet dyeing machine or similar processes MRSI-SD is recommended in the concentration range of 2 to 50 gms/M.T. HANDLING We do not force any ill effect on health, provided the product is used for the purpose it is intended and due attention is paid to the precautions and protective measures necessary when chemicals are handled. PACKING: IN 5 Kg 30 Kg, 50 Kgs. Plastic Carboys NOTE The information presented here is based on our present state knowledge. All recommendations regarding the use of our products are in an advisory capacity. Buyers and users should make their own assessment of our products under their own conditions and for their own requirements. Hence this should not therefore be construed as guaranteeing specific properties of the product. -------------------------------------------------------------------------------------------------------------------------------- D. R. P SILICONE 222 NITIN INDL. COMPLEX, SUHASINI PAWASKAR MARG, W.E. HIGHWAY, DAHISAR - E MUMBAI-68 TEL/FAX-2 896 8673 *(O) 2897 6177 * MOBILE NO. 9920397827 Email: mrsilicones@gmail.com Visit us at www.mrsilicone.co.in